Multi-input Data Logger

NR-X series

CatalogsView Catalog

Remote unit for NR-XNR-XR01

NR-XR01 - Remote unit for NR-X

Data Sheet (PDF)

360°view (3D PDF)

Data Sheet (PDF)

Specifications

Model				NR-XR01
Expansion remote connection				Dedicated remote input port × 1 (Remote IN), Output port × 1 (Remote OUT) Connection to NR-X100W master data collection unit or other NR-XR01 remote units using a remote unit cable Daisy-chain connections of multiple remote units allowed^*1
Number of connectable measurement units				Max. 8 units^*2
Continuous acquisition speed				Max. 100 kHz for all acquisition channels^*3
Synchronization between measurement units				±1 μs or less^*4
Power supply				Supplied from NR-U5 AC adapter or NR-X100W master data collection unit (operation with no AC adapter)
Power supply	Power consumption			Approx. 2.9 W
Environmental resistance	Ambient temperature			0 to +40°C32°F to 104°F
	相对湿度			10 to 85% RH (no condensation)
Weight				Approx. 210 g7.41 oz
^1Remote unit cables can be extended by connecting a remote extension cable. The total length of remote cables used in the system should be no more than 100 m328.1'. The distance between the master data collection unit and remote units or between remote units should be no more than 60 m196.9'. ^2Use is permitted only if the total power consumption of all connected measurement units is 20 W or less. However, if the remote units are not connected to the NR-U5 AC adapter, the total power consumption must be 10 W or less. The total number of measurement units and remote units for a system varies depending on the system configuration. Refer to “Number of connectable measurement units” in the master data collection unit for more information. ^3The continuous acquisition speed varies according to the system configuration. Refer to “Continuous acquisition speed” in the master data collection unit for more information. ^4The sampling cycle and timing vary depending on the connected measurement unit. When using the NR-CA04 in combination with other unit types, a sampling delay may occur between the NR-CA04 and the other units with some setting configurations.