Sensor Head, Air Cylinder ModelGT2-A50

GT2-A50 - Sensor Head, Air Cylinder Model

Specifications

Model		GT2-A50
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		50 mm1.97"
Resolution		0.5 μm0.02 Mil
Indicated accuracy		3.5 µm0.14 Mil(p-p)^*1
Measuring force	Downward mounting	3.2 N^*2
	Side mounting	2.8 N^*2
	Upward mounting	2.4 N^*2
Sampling cycle		1 ms
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67^*3
	Pressure resistance	1 MPa
	Applied pressure range	0.25 to 0.5 MPa
	Ambient temperature	0 to +55 °C32 to 131 °F(No freezing)
	相对湿度	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm0.06", 2 hours in each of the X, Y, and Z directions^*4
伴侣rials	Main body	Main body case: Zinc die-casting; Cylinder part: Aluminium alloy; Air joint resin part: Polyacetal; Air joint metal part: Brass nickel plating; Indicator: Polyarylate
	Dust boot	NBR
	Contact	TYPE304, 440C Stainless steel^*5
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 405 g (excluding cable)
^1Value when the ambient temperature is 20 °C68 °F. ^2Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^3Make sure the air tube is connected to the air exhaust joint and that no foreign materials enter inside from the joint. ^4In the case where a mounting bracket D is used with GT2-A32 and GT2-A50, the double amplitude becomes 0.75 mm0.03". ^*5The contact is included with the sensor.