Digital Fiber Optic Sensor

FS-N40 series

CatalogsView Catalog

Expansion Unit (Zero Line Type)FS-N40

FS-N40 - Expansion Unit (Zero Line Type)

Data Sheet (PDF)

360°view (3D PDF)

Data Sheet (PDF)

Specifications

Model				FS-N40
Type				Zero Line Type
Main unit/expansion unit				Expansion unit
Response time				23 µs (S-HSPD^1) /50 µs (HSPD^2) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) /64 ms (TERA)
Number of control outputs				None^*3
Light source LED				Transmitter side: Red, four-element LED (wavelength: 660 nm)
External input				Input time: 2 ms (ON) /20 ms (OFF) or longer^*4
Unit expansion				Up to 16 units (17 units connected in total including the main unit) . However, each dual output type will be treated as two expansion units.
Protection circuit				Protection against reverse power connection, output overcurrent, output surge, and reverse output connection
Mutual interference prevention				S-HSPD /台:0单位,好:4单位,涡轮/超级/ ULTRA/MEGA/TERA: 8 units (The mutual interference prevention values are twice those shown here when Double is set.)
Power supply	Power voltage			10 to 30 VDC (including 10 % ripple (P-P) or less) , class 2 or LPS^*5
	Power consumption			During normal operation: 870 mW or less (34 mA or less at 24 V/62 mA or less at 12 V) ECO ON: 800 mW or less (31 mA or less at 24 V/56 mA or less at 12 V) ECO FULL: 710 mW or less (28 mA or less at 24 V/49 mA or less at 12 V)^*6
Environmental resistance	Ambient light			Incandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or less
	Ambient temperature			-20 °C-4 °Fto +55 °C+131 °F(no freezing)^*7
	Vibration resistance			10 to 55 Hz; double amplitude 1.5 mm0.06"; 2 hours each for X, Y, and Z axes
	Shock resistance			500 m/s²; 3 times each for X, Y, and Z axes
Case material				Main unit and cover: polycarbonate
Weight				Approx. 23 g
^1Restrictions when S-HSPD is selected Area detection, Area % Mode, DATUM, Rising edge, and Falling edge cannot be selected for Detection Mode. Output timer, Limit Detection, and Display Gain cannot be used. FULL cannot be selected for the ECO function. ^2Restrictions when HSPD is selected Display Gain cannot be used. ^3This counts as 1 output when connecting multiple units to the FS-MC8N/P, NU Series. ^4The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected. ^5When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher. ^6The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max. ^*7When expanded by 1 to 2 units: -20°C-4°Fto +55°C+131°F. When expanded by 3 to 10 units: -20°C-4°Fto +50°C+122°F. When expanded by 11 to 16 units: -20°C-4°Fto +45°C+113°F. When using 2 outputs, 1 unit is counted as 2 units. The prescribed values for the ambient temperature assume that the sensor amplifi er has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space.