Amplifier Units Cable type Main unit PNPFS-N41P

FS-N41P - Amplifier Units Cable type Main unit PNP

Data Sheet (PDF)

Manuals

Specifications

Model		FS-N41P
Type		Cable
Output		PNP
Main unit/expansion unit		Main unit
Response time		23 µs (S-HSPD^1) /50 µs (HSPD^2) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) /64 ms (TERA)
Number of control outputs		1
Number of external inputs		―
Light source LED		Transmitter side: Red, four-element LED (wavelength: 660 nm)
Control output		Open-collector, 30 V or less 100 mA or less per output, 100 mA or less total for 2 outputs (when used as a solitary unit) /20 mA or less (when used as an expansion unit) Residual voltage: 1.6 V or less (output current: 10 mA or less) /2.2 V or less (output current: 10 to 100 mA)
External input		Input time: 2 ms (ON) /20 ms (OFF) or longer^*3
Unit expansion		总共16单元(17单元连接的萤火虫ing the main unit) . However, each dual output type will be treated as two expansion units.
Protection circuit		Protection against reverse power connection, output overcurrent, output surge, and reverse output connection
Mutual interference prevention		S-HSPD/HSPD: 0 units, FINE: 4 units, TURBO/SUPER/ULTRA/MEGA/TERA: 8 units (The mutual interference prevention values are twice those shown here when Double is set.)
Power supply	Power voltage	10 to 30 VDC (including 10 % ripple (P-P) or less) , class 2 or LPS^*4
	Power consumption	During normal operation: 910 mW or less (36 mA or less at 24 V/65 mA or less at 12 V) 生态:840 mW或更少(33马或更少at 24 V/60 mA or less at 12 V) ECO FULL: 750 mW or less (30 mA or less at 24 V/52 mA or less at 12 V)^*5
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or less
	Ambient temperature	-20 °C-4 °Fto +55 °C+131 °F(no freezing)^*6
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm0.06"; 2 hours each for X, Y, and Z axes
	Shock resistance	500 m/s²; 3 times each for X, Y, and Z axes
Case material		Main unit and cover: polycarbonate
Weight		Approx. 78 g
^1Restrictions when S-HSPD is selected Area detection, Area % Mode, DATUM, Rising edge, and Falling edge cannot be selected for Detection Mode. Output timer, Limit Detection, and Display Gain cannot be used. FULL cannot be selected for the ECO function. ^2Restrictions when HSPD is selected Display Gain cannot be used. ^3The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected. ^4When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher. ^5The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max. ^6When expanded by 1 to 2 units: -20°C-4°Fto +55°C+131°F. When expanded by 3 to 10 units: -20°C-4°Fto +50°C+122°F. When expanded by 11 to 16 units: -20°C-4°Fto +45°C+113°F. When using 2 outputs, 1 unit is counted as 2 units. The prescribed values for the ambient temperature assume that the sensor amplifi er has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space.

Other Models