放大器单元电缆型扩展单元PNPFS-N42P

FS-N42P - Amplifier Units Cable type Expansion Unit PNP

Data Sheet (PDF)

Manuals

Specifications

Model		FS-N42P
Type		电缆
Output		PNP
Main unit/expansion unit		扩展单位
Response time		23 µs (S-HSPD^1/50μs（HSPD^2）/250μs（细）/500μs（Turbo）/ 1 ms（超级）/ 4 ms（超）/ 16 ms（Mega）/ 64 ms（Tera）
Number of control outputs		1
Number of external inputs		―
Light source LED		Transmitter side: Red, four-element LED (wavelength: 660 nm)
Control output		Open-collector, 30 V or less 100 mA or less per output, 100 mA or less total for 2 outputs (when used as a solitary unit) /20 mA or less (when used as an expansion unit) Residual voltage: 1.6 V or less (output current: 10 mA or less) /2.2 V or less (output current: 10 to 100 mA)
External input		Input time: 2 ms (ON) /20 ms (OFF) or longer^*3
单位扩展		Up to 16 units (17 units connected in total including the main unit) . However, each dual output type will be treated as two expansion units.
保护电路		Protection against reverse power connection, output overcurrent, output surge, and reverse output connection
相互干扰预防		S-HSPD / HSPD：0单位，精细：4个单位，涡轮增压/超级/超/ Mega / TERA：8个单位（相互干扰预防值是在齐全时显示的两倍。）
Power supply	电源电压	10至30 VDC（包括10％纹波（P-P）或更低），2类或LPS^*4
	Power consumption	During normal operation: 910 mW or less (36 mA or less at 24 V/65 mA or less at 12 V) 生态:840 mW或更少(33马或更少at 24 V/60 mA or less at 12 V) ECO FULL: 750 mW or less (30 mA or less at 24 V/52 mA or less at 12 V)^*5
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or less
	Ambient temperature	-20 °C-4 °F到+55°C+131°F.(no freezing)^*6
	Vibration resistance	10到55 Hz;双幅度1.5毫米0.06"; 2 hours each for X, Y, and Z axes
	Shock resistance	500米/秒²; 3 times each for X, Y, and Z axes
Case material		主机和盖子：聚碳酸酯
Weight		Approx. 48 g
^1Restrictions when S-HSPD is selected 对于检测模式，无法选择区域检测，区域％模式，数据，上升沿和下降沿。 Output timer, Limit Detection, and Display Gain cannot be used. FULL cannot be selected for the ECO function. ^2Restrictions when HSPD is selected Display Gain cannot be used. ^3The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected. ^4When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher. ^5The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max. ^6When expanded by 1 to 2 units: -20°C-4°Fto +55°C+131°F. When expanded by 3 to 10 units: -20°C-4°Fto +50°C+122°F. When expanded by 11 to 16 units: -20°C-4°Fto +45°C+ 113°F. When using 2 outputs, 1 unit is counted as 2 units. The prescribed values for the ambient temperature assume that the sensor amplifi er has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space.

Other Models