Multi-Purpose Digital Laser Sensor

LV-N series

CatalogsView Catalog

放大器,电缆,主要单位,NPN型LV-N11N

Specifications

Model

LV-N11N

Type

2 output

Output

NPN

Cable/connector

Cable

Main/Expansion unit

Main unit

I / O

Control outputs

2 output

External input

1 input

Monitor output

None

Output selection

LIGHT-ON/DARK-ON (switch-selectable)

Timer function

Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer,
Timer duration selectable: 1 ms to 9,999 ms,
Maximum error against the setting value: ±10% max.

Control outputs

NPN open collector 30 V, Residual voltage 1 V or less (Output current: 10 mA or less) / 2 V or less (Output current: 10 to 100 mA)
(Stand-alone) 1 output max: 100 mA or less, 2 output total: 100 mA or less
(Multiple connections) 1 output max: 20 mA or less

Response time

80 µs (HIGH SPEED)/250 µs (FINE)/500 µs (TURBO)/1 ms (SUPER)/4 ms (ULTRA)/16 ms (MEGA)*1

Monitor output

-

External input

Input time 2 ms (ON)/20 ms (OFF) or more*2

Number of interference
prevention units

Connected to other than LV-S31: 0 for HIGH SPEED; 2 for FINE/TURBO/SUPER; 4 for ULTRA/MEGA,
Connected to LV-S31: 2 for FINE; 4 for TURBO/SUPER/ULTRA/MEGA*3

Case size

H 32.6 mm1.28"× W 9.8 mm0.39"× L 78.7 mm3.1"

Unit expansion

Up to 17 units can be connected in total (two-output type is treated as two units)

Protection circuit

Reverse polarity protection, Over-current protection, Surge absorber

Rating

Power voltage

24 VDC (operating voltage 10 to 30 VDC (with ripple)), Ripple (P-P) 10 % or less, Class 2 or LPS*4*5

Power
consumption

Normal: 830 mW or less (at 30 V. 30 mA at 24 V, 56 mA or less at 12 V)*6
Eco on mode: 710 mW or less (at 30 V. 26 mA at 24 V, 48 mA or less at 12 V)*6
Eco Full mode: 550 mW or less (at 30 V. 21 mA at 24 V, 40 mA or less at 12 V)
*7

Environmental resistance

Ambient temperature

-20 to +55 °C-4 to 131 °F(No freezing)*8

相对湿度

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s2, 3 times in each of the X, Y, and Z directions

Material

Cable

PVC

Case

Main unit and cover material: Polycarbonate

Weight

Approx. 75 g

*180 µs cannot be selected when the LV-S31/S62/S63 is connected
*2Input time is 25 ms (ON)/25 ms (OFF) when external calibration time is selected.
*3These numbers double when "DOUBLE" is selected.
*4Use with the over current protection device which is rated 30 V or more and not more than 1 A.
*5To connect more than 9 units, the power voltage must be 20 V or more.
*6Increases 30 mW (1 mA) for HIGH SPEED mode.
*7It increases by 15% when connected to the LV-NH100/NH110/NH300. It does not include the power consumption of the load.
Power consumption when expansion units are connected is the total power consumption of each amplifier unit. Example: When one main unit (LV-N11N) is connected to 2 expansion units (LV-N12N) and they are used with LV-NH100 heads in HIGH SPEED mode.
(1.15 × 860 mW × 1) + (1.15 × 860 mW × 2) = 2967 mW max.
*8If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less for a unit.
One or two more units connected: -20 to +55 °C-4 to 131 °F; 3 to 10 more units connected: -20 to +50 °C-4 to 122 °F; 11 to 16 more units connected: -20 to +45 °C-4 to 113 °F. When using 2-outputs, one unit is counted as two units.

Other Models