Revolutionizing general-purpose photoelectric sensors

PR-G series

CatalogsView Catalog

Rectangular Thrubeam M8 3-pin Connector Type, 30 mPR-G51C3PD

Specifications

Model

PR-G51C3PD

Type

Thrubeam

Shape

Rectangular

Output

PNP

Cable connection

M8 connector (3 pin)

Detecting distance

30 m98.43'

Number of control outputs

2 (Dark-ON +Light ON)*1

Output operation

Output 1

Dark-ON

Output 2

Response time

1女士

敏感度调整

一转修剪器(230°)

Spot diameter

Light source

4 elements, Red LED (631 nm)

Light interference prevention function

Indicator lamp

Transmitter: power supply indicator (green)
Receiver: output indicator (yellow),
Stable operation indicator (green)

Control output

PNP open collector
30 VDC or less, 100 mA or less
Residual voltage: 1.2 V or less at less than 10 mA, 2 V or less at 10 to 100 mA

Stop emission input

Non-voltage input
Input time ON: 1 ms or more,
OFF: 20 ms or more

Protection circuit

Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection

Rating

Power voltage

10 to 30 VDC, including Ripple (P-P) 10 %

Power consumption

Transmitter: 450 mW max.
(15 mA max. at 24 V, 15 mA max. at 12 V)
Receiver: 360 mW max.
(12 mA max. at 24 V, 15 mA max. at 12 V)

Environmental resistance

Enclosure rating

IP68(IEC60529),IP69K(DIN40050-9),4X,6P,13(NEMA250)*2

Insulation resistance

20 MΩ or more (500 VDC)

Ambient light

Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less

Ambient temperature

-20 to +70 °C-4 to 158 °F(No freezing)*3

Storage temperature

-20 to +70 °C-4 to 158 °F

相对湿度

35 to 85 % RH (No condensation)

Withstand voltage

1,000 VAC, 50/60 Hz, 1 min

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

1,000 m/s2, 6 times in each of the X, Y, and Z directions

Material

Case: SUS 316L,
Indicator cover: PES,
7段显示盖/镜头盖:PMMA(耐刮擦涂层)
M18 nut: Brass (Nickel plating),
Lock washer: Steel (Chrome plating)

Accessories

Instruction manual

Weight

约。55克

*1For the threaded mount type sensors, the outputs are 1 NPN output and 1 PNP output.
*2For the connector type, the enclosure rating varies depending on the cable that is used.
*3When the ambient temperature is 60 °C140 °For higher, the device should be powered with no more than 24 VDC and 50 mA.

Other Models