General Purpose Digital Contact Sensor
GT series
SpecsGeneral Purpose Digital Contact SensorGT series
传感器头:标准/低应力
模型 |
GT-H10 |
GT-H22 |
GT-H10L |
GT-H22L |
|||
Image |
|||||||
类型 |
Sensor head: Standard |
Sensor head: Low-stress |
|||||
Measuring range |
10毫米0.39" |
22 mm0.87" |
10毫米0.39" |
22 mm0.87" |
|||
Measuring force |
Downward mounting |
1.0 N.*1 |
1.5 N*1 |
0.3 N*1 |
0.35N.*1 |
||
Side mounting |
0.9 N.*1 |
1.4 N*1 |
0.25N*1 |
0.3 N*1 |
|||
Upward mounting |
0.8 N*1 |
1.3 N*1 |
0.2 n*1 |
0.25N*1 |
|||
机械响应 |
10 Hz(在23°C的环境温度下73 °F) |
8 Hz(环境温度为23°C73 °F) |
7赫兹(在环境temperature of 23 °C73 °F) |
5 Hz (at ambient temperature of 23 °C73 °F) |
|||
重复性 |
3μm0.00012"(at ambient temperature of 23 °C73 °F)*2 |
8 µm0.00031"(at ambient temperature of 23 °C73 °F)*2 |
3μm0.00012"(at ambient temperature of 23 °C73 °F)*2 |
8 µm0.00031"(at ambient temperature of 23 °C73 °F)*2 |
|||
环境抵抗力 |
Enclosure rating |
IP67 |
- |
||||
Ambient temperature |
-10 to +55 °C14 to 131 °F |
||||||
相对湿度 |
35 to 85 % RH |
||||||
Material |
Housing: TYPE430 Stainless steel, Indicator: Polyarylate, |
Housing: TYPE430 Stainless steel, Indicator: Polyarylate, |
|||||
Weight |
约。115克(2米6.6'电缆) |
约。135 g (With 2-m6.6'电缆) |
约。115克(2米6.6'电缆) |
约。135 g (With 2-m6.6'电缆) |
|||
*1Value read near the center of the measuring range |
Sensor head: Air push models
模型 |
GT-A10 |
GT-A22 |
|||
Image |
|||||
类型 |
Sensor head: Air push models |
||||
Measuring range |
10毫米0.39" |
22 mm0.87" |
|||
Measuring force |
Downward mounting |
1.0 N.*1 |
1.5 N*1 |
||
Side mounting |
0.9 N.*1 |
1.4 N*1 |
|||
Upward mounting |
0.8 N*1 |
1.3 N*1 |
|||
重复性 |
3μm0.00012"(at ambient temperature of 23 °C73 °F)*2 |
8 µm0.00031"(at ambient temperature of 23 °C73 °F)*2 |
|||
环境抵抗力 |
Enclosure rating |
IP67*3 |
|||
Pressure resistance |
1.0 MPa |
||||
施加压力范围 |
0.35 to 0.5 MPa |
||||
Ambient temperature |
0至+55°C32 to 131 °F |
||||
相对湿度 |
35 to 85 % RH |
||||
Material |
Housing: TYPE430 stainless steel, Cylinder: Aluminum alloy, Plastic section of air joint: Polyacetal, Metal section of air joint: Nickel-plated brass, |
||||
Weight |
约。150 g (With 2-m6.6'电缆) |
约。180 g (With 2-m6.6'电缆) |
|||
*1Value read near the center of the measuring range |
Amplifier unit: NPN output
模型 |
GT-71A |
GT-72A |
gt-75a. |
gt-76a. |
|||
Image |
|||||||
类型 |
Amplifier unit |
||||||
Mounting method |
DIN rail mount*1 |
Panel mount |
|||||
Output |
NPN输出 |
||||||
Main unit/expansion unit |
Main unit*2 |
扩展单位*2 |
Main unit*2 |
扩展单位*2 |
|||
Power consumption |
Normal |
At 12 V: 1,140 mW (95 mA) or less, At 24 V: 1,200 mW (50 mA) or less |
|||||
省电(ECO) |
在12 V:600 MW(50 mA)或更低,24 V:840 MW(35 mA)或更少 |
||||||
Display power |
Measured value display |
6位7段LED(红色) |
|||||
Other displays |
2-color 13-level bar LED display (red, green), indicators (red, green) |
||||||
Display range |
-99.999 to 999.999 |
||||||
Display resolution |
1 µm0.000039“ |
||||||
Sampling rate |
2,000 times/second |
||||||
控制输入 |
Timing/preset/bank input |
Timing input: Non-voltage input (relay contact, solid state), input time: 2 ms or more |
|||||
Response time |
hsp (1.5 ms) , 5 ms, 10 ms, 100 ms, 500 ms, 1 s, 5 s |
||||||
高,去,输出低 |
NPN open collector, 50 mA max. (40 V or less), residual voltage: 1 V or less, N.O./N.C. switchable |
||||||
Major functions |
预设,保持,可变滞后,可变响应时间,乘法器设置,银行功能(4个银行), |
||||||
Rating |
电源电压 |
12 to 24 VDC, Ripple (P-P) 10 % or less*3 |
|||||
环境抵抗力 |
Ambient temperature |
-10 to +55 °C14 to 131 °F(No freezing) |
|||||
相对湿度 |
35 to 85 % RH (No condensation) |
||||||
抗振 |
10至55 Hz,双幅度1.5毫米0.06", 2 hours in each of the X, Y, and Z directions |
||||||
Material |
主体案例:聚碳酸酯,关键顶部:聚缩醛,前板:聚碳酸酯,电缆:PVC |
||||||
配件 |
Instruction manual |
Panel mounting bracket, protective front cover, power cable, instruction manual |
Panel mounting bracket, protective front cover, power cable, flat cable for expansion, instruction manual |
||||
Weight |
约。110 g (including the power cable) |
约。110 G(:包括面板安装支架,保护前盖,电源线) |
|||||
*1务必将DIN导轨安装放大器安装在DIN导轨上(即,本机应安装在金属DIN板本身上)。对于额外的放大器单元安装,请务必使用结束单元(OP-26751)。 |
Amplifier unit: PNP output
模型 |
GT-71AP |
GT-72AP |
gt-75ap. |
GT-76AP. |
|||
Image |
|||||||
类型 |
Amplifier unit |
||||||
Mounting method |
DIN rail mount*1 |
Panel mount |
|||||
Output |
PNP输出 |
||||||
Main unit/expansion unit |
Main unit*2 |
扩展单位*2 |
Main unit*2 |
扩展单位*2 |
|||
Power consumption |
Normal |
At 12 V: 1,140 mW (95 mA) or less, At 24 V: 1,200 mW (50 mA) or less |
|||||
省电(ECO) |
在12 V:600 MW(50 mA)或更低,24 V:840 MW(35 mA)或更少 |
||||||
Display power |
Measured value display |
6位7段LED(红色) |
|||||
Other displays |
2-color 13-level bar LED display (red, green), indicators (red, green) |
||||||
Display range |
-99.999 to 999.999 |
||||||
Display resolution |
1 µm0.000039“ |
||||||
Sampling rate |
2,000 times/second |
||||||
控制输入 |
Timing/preset/bank input |
Timing input: Non-voltage input (relay contact, solid state), input time: 2 ms or more |
|||||
Response time |
hsp (1.5 ms) , 5 ms, 10 ms, 100 ms, 500 ms, 1 s, 5 s |
||||||
高,去,输出低 |
PNP open collector, 50 mA max. (30 V or less), residual voltage: 1 V or less, N.O./N.C. switchable |
||||||
Major functions |
预设,保持,可变滞后,可变响应时间,乘法器设置,银行功能(4个银行), |
||||||
Rating |
电源电压 |
12 to 24 VDC, Ripple (P-P) 10 % or less*3 |
|||||
环境抵抗力 |
Ambient temperature |
-10 to +55 °C14 to 131 °F(No freezing) |
|||||
相对湿度 |
35 to 85 % RH (No condensation) |
||||||
抗振 |
10至55 Hz,双幅度1.5毫米0.06", 2 hours in each of the X, Y, and Z directions |
||||||
Material |
主体案例:聚碳酸酯,关键顶部:聚缩醛,前板:聚碳酸酯,电缆:PVC |
||||||
配件 |
Instruction manual |
Panel mounting bracket, protective front cover, power cable, instruction manual |
Panel mounting bracket, protective front cover, power cable, flat cable for expansion, instruction manual |
||||
Weight |
约。110 g (including the power cable) |
约。110 G(:包括面板安装支架,保护前盖,电源线) |
|||||
*1务必将DIN导轨安装放大器安装在DIN导轨上(即,本机应安装在金属DIN板本身上)。对于额外的放大器单元安装,请务必使用结束单元(OP-26751)。 |