Sensor Head, Thickness Measurement TypeSI-F80

SI-F80 - Sensor Head, Thickness Measurement Type

Data Sheet (PDF)

Manuals

Specifications

Model		SI-F80
Type		Thickness measurement type Sensor head
Measurement range		0.05 to 1.1 mm0.002" to 0.04"^*1 (Possible detection distance : 80 to 81.1 mm3.15" to 3.19")
Light source		Infrared SLD Central wavelength 820 nm Output 0.6 mW Class 1 Laser product (IEC60825-1/FDA (CDRH) Part 1040.10^*2)
Spot diameter		ø20 µmø0.000787"^*3
Linearity		±0.3 µm±0.000012"^*4
Resolution		0.25 µm0.00000984"^*5
Sampling cycle		200 µs
Light source for guide		Red semiconductor laser Wavelength 655 nm Output 0.1 mW Class 1 Laser product (IEC60825-1/FDA (CDRH) Part 1040.10^*2)
LED display		目标中心附近of measurement range: green lights. Target within measurement range: orange lights. Target outside measurement range: Flashes orange.
Temperature fluctuation		0.01% of F.S./°C
Environmental resistance	Enclosure rating	IP64
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C32 to 122 °F
	相对湿度	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm0.06", 2 hours in each of the X, Y, and Z directions
Material		SUS
Material	Sensor head
	Spectrum unit	Polycarbonate
Weight		Approx. 39 g (including cable)
^1The thickness measurement type sensor head displays the measurement range for the distance between plates of glass. Ensure that the measurement target is within the possible detection distance range. ^2The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No. 50. ^3Indicates the minimum beam spot diameter within the measurement range. ^4This value is obtained by measuring the gap between two glass plates with the number of averaging measurements set to 256. ^*5This value is obtained by measuring a glass plate surface located at the center of the measurement range with the number of averaging measurements set to 4,096.

Other Models